Abarth
Alfa Romeo
Asia Motors
Aston Martin
Audi
Austin
Austin-Healey
Bentley
BMW
Chevrolet
Chrysler
Citroen
Daewoo
Daihatsu
Daimler
DMC
Dodge
Ferrari
Fiat
Ford
Ginetta
Hillman
Holden
Honda
Hummer
Hyundai
Indigo
Infiniti
Isuzu
Jaguar
Jeep
Jensen
Kia
Lancia
Land Rover
LDV
Lexus
Lotus
Mahindra
Maserati
Mazda
Mercedes-Benz
MG
Mini
Mitsubishi
Morris
Nissan
Noble
Opel
Peugeot
Porsche
Proton
Reliant
Renault
Rootes Group
Rover
Saab
Seat
Singer
Skoda
Smart
Ssangyong
Subaru
Sunbeam
Suzuki
Talbot
Tata
Tesla
Toyota
Triumph
TVR
Vauxhall
Volkswagen
Volvo
Reduce Wear on Suspension Components
Mitsubishi Shogun Sport QE 2.4 DI-D 4x4 Suspension Upgrades
2015 and later
Show
Control Arm Upper - Bushing Service Kit
KIT6500K
Fitting Position: Front Axle;Fitting Difficulty: difficult;Fitting time [min]: 120;Axle alignment required after fitting
Quantity required: 2
Please ask for pricing
In Stock
Control Arm Upper - Ball Joint Service Kit
KIT6500RK
Fitting Position: Front Axle;Fitting Difficulty: difficult;Fitting time [min]: 60
Quantity required: 2
£58.74 (inc. VAT)
Available to Order
Control Arm Upper - Bushing Kit
SPF5219K
Fitting Position: Front Axle;Fitting Difficulty: difficult;Fitting time [min]: 180;Axle alignment required after fitting
Quantity required: 1
£214.01 (inc. VAT)
In Stock
Control Arm Lower Front - Inner Camber Bolt Kit
TRC0074Fitting Position: Front Axle;Fitting Position: Lower;Fitting Position: inner;Fitting Position: both sides;Fitting Difficulty: difficult;Fitting time [min]: 120;Axle alignment required after fitting
Quantity required: 1
Please ask for pricing
In Stock
Track Rod Ends
TRC4090
Quantity required: 2
Please ask for pricing
Available to Order
Fitment Difficulty:![Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.]()
Fitting Time: 30mins![Fitting Time icon]()
Wheel-alignment required after fitment
Control Arm Upper - Arm Assembly
TRC581
Fitting Position: Front Axle;Fitting Position: Upper;Fitting Position: both sides;Fitting Difficulty: difficult;Fitting time [min]: 150;Axle alignment required after fitting
Quantity required: 1
£295.19 (inc. VAT)
In Stock
Control Arm Lower - Arm Assembly
TRC582
Fitting Position: Front Axle;Fitting Position: Lower;Fitting Position: both sides;Fitting Difficulty: difficult;Fitting time [min]: 150;Axle alignment required after fitting
Quantity required: 1
£616.84 (inc. VAT)
In Stock
Control Arm Upper - Arm Assembly
TRC6505
Fitting Position: Front Axle;Fitting Position: Upper;Fitting Position: both sides;Follow installation instructions;Fitting Difficulty: difficult;Fitting time [min]: 120;Axle alignment required after fitting
Quantity required: 1
£620.54 (inc. VAT)
In Stock
33mm Heavy Duty Non Adjustable Anti-Roll Bar
RC0098F-33
SuperPro Roll Control Front Anti-Roll Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of bigger front Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars are designed correctly and the Anti-Roll Bar links are lengthened, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Anti-Roll Bars will
The resistance to the fitment of bigger front Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars are designed correctly and the Anti-Roll Bar links are lengthened, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading the front Anti-Roll Bars will
- Improve the stability by compensating for the change in centre of gravity of the chassis
- Increase tyre life
- Control body roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
Quantity required: 1
£495.56 (inc. VAT)
Available to Order
Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes
Fitment Difficulty:![Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.]()
Fitting Time: 1hr![Fitting Time icon]()
Control Arm Lower-Inner Bush Kit
SPF2991K
Remove original shell before fitment
Quantity required: 1
£207.42 (inc. VAT)
In Stock
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes, 4 x Washer(s) - used for Steel and / or Polyurethane
Fitment Difficulty:![Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.]()
Fitting Time: 4hrs![Fitting Time icon]()
Control Arm Upper-Inner Bush Kit
SPF2997K
Remove original shell before fitment
Quantity required: 1
£142.08 (inc. VAT)
In Stock
Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes
Fitment Difficulty:![Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.]()
Fitting Time: 3hrs![Fitting Time icon]()
Control Arm Upper Complete Assembly - Fixed Offset
TRC6500
Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber.
Quantity required: 1
£549.72 (inc. VAT)
In Stock
Fitment Difficulty:![Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.]()
Fitting Time: 3hrs![Fitting Time icon]()
Wheel-alignment required after fitment
13
Lift Correction Upper Control Arm Kit
Vehicles Without Headlight Sensor
TRC500
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction.
Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.
Not suitable for vehicles with Headlight Sensor.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features:
Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.
Not suitable for vehicles with Headlight Sensor.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features:
- in-built camber and caster change to suit lifted vehicle
- In-built droop increase of approx. 10mm
- Increased clearance between spring and Control Arm at full articulation
- OE quality ball joint
- SuperPro Bushings
- Made in Australia
Quantity required: 1
Please ask for pricing
Available to Order
Kit Includes: 2 x Arms
Fitment Difficulty:![Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.]()
Fitting Time: 3hrs![Fitting Time icon]()
Wheel-alignment required after fitment
Vehicles With Headlight Sensor
TRC501
Left and Right Arms for Lifted Vehicles with Caster and Camber Correction.
Headlight sensor bracket on RH Arm Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.
Suits vehicles with Headlight Sensor.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features:
Headlight sensor bracket on RH Arm Based on a standard 2" lift - Approx 2" caster and approx an extra 1.5" of camber.
Suits vehicles with Headlight Sensor.
Arms fitted with Uprated Ball joints and SuperPro Bushes to reduce Arm movement Getting the correct alignment is no longer a problem. Not only do these arms provide for better wheel alignment settings, they have been designed to include increased droop and clearance between the arm and strut.
These arms deliver up to 3 degree of caster along with extra camber, allowing for the optimum alignment settings for a 2" lifted vehicle.
Key Features:
- in-built camber and caster change to suit lifted vehicle
- In-built droop increase of approx. 10mm
- Increased clearance between spring and Control Arm at full articulation
- OE quality ball joint
- SuperPro Bushings
- Made in Australia
Quantity required: 1
£782.72 (inc. VAT)
In Stock
Kit Includes: 2 x Arms
Fitment Difficulty:![Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.]()
Fitting Time: 3hrs![Fitting Time icon]()
ReadyStrut Top Caps
RS004
Strut Cap, Spring Seat, Boot, Nuts & Washers
Quantity required: 2
£78.26 (inc. VAT)
In Stock
Kit Includes: 1 x Strut Top Cap
Shock Absorber Lower Bush Kit
SPF2940PK
Utilises superior SuperPro Hybrid material for massive increase in durability in all applications.
Quantity required: 1
£113.46 (inc. VAT)
In Stock
Kit Includes: 2 x Polyurethane Bushes
Fitment Difficulty:![Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.]()
Fitting Time: 2hrs![Fitting Time icon]()
Droop Stop Bush Kit
SPF4633K
Allows more droop travel for lifted vehicles. Not to be used with Bilstein Shock Absorbers.
Quantity required: 1
£120.80 (inc. VAT)
In Stock
Kit Includes: 2 x Bump Stops
Fitment Difficulty:![Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.]()
Fitting Time: 1hr![Fitting Time icon]()
Strut Top Spacer Kit
TRC008-6
Raises vehicle approximately 10-12mm
Quantity required: 1
£93.16 (inc. VAT)
In Stock
Sway Bar Mount - Bushing Kit
SPF0343-20K
Fitting Position: Rear Axle;Fitting Difficulty: easy;Fitting time [min]: 45
Quantity required: 1
£25.26 (inc. VAT)
In Stock
Kit Includes: 2 x Polyurethane Bushes
Radius Arm - To Differential Bushing Kit
SPF3861K
Fitting Position: Rear Axle;Fitting Difficulty: difficult;Fitting time [min]: 120;Axle alignment required after fitting
Quantity required: 1
£204.22 (inc. VAT)
Available to Order
Coil Spring Pad - Upper Bushing Kit
SPF5425-20K
Fitting Position: Rear Axle;Fitting Difficulty: difficult;Fitting time [min]: 60;Axle alignment required after fitting
Quantity required: 1
£73.80 (inc. VAT)
In Stock
Radius Arm - To Differential Bushing Kit
SPF5513K
Fitting Position: Rear Axle;Fitting Position: Rear;Fitting Position: both sides;Fitting Difficulty: difficult;Fitting time [min]: 120;Axle alignment required after fitting
Quantity required: 1
£143.57 (inc. VAT)
Available to Order
Anti-Roll Bar Link and Bush Kit
SPF2966BK
165mm total Length, Thread Length each end 65mm
Quantity required: 1
£74.32 (inc. VAT)
In Stock
Kit Includes: 8 x Nuts, 2 x Polyurethane Rods, 8 x Washer(s) - used for Steel and / or Polyurethane, 8 x Polyurethane Bushes
Fitment Difficulty:![Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.]()
Fitting Time: 30mins![Fitting Time icon]()
Anti-Roll Bar Link Bush Kit
SPF2755SK
Quantity required: 2
£21.18 (inc. VAT)
In Stock
Kit Includes: 4 x Polyurethane Bushes
Fitment Difficulty:![Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.]()
Fitting Time: 30mins![Fitting Time icon]()
24mm Heavy Duty Non Adjustable Anti-Roll Bar
RC0098R-24
SuperPro Roll Control Rear Anti-Roll Bar Packages are the perfect addition to a 4WD.
The resistance to the fitment of rear Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars and link package is designed correctly, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Anti-Roll Bars will:
The resistance to the fitment of rear Anti-Roll Bars to 4WD vehicles is the flawed concept of the loss of articulation in the suspension.
If the replacement Anti-Roll Bars and link package is designed correctly, replacement Anti-Roll Bars can be fitted with minimal or no loss of articulation.
Upgrading to Roll Control Anti-Roll Bars will:
- Improve the stability by compensating for the change in centre of gravity of the chassis
- Neutralise the factory understeer
- Increase tyre life
- Control the roll in load carrying and towing applications
- Improve safety with no loss of comfort or articulation
Quantity required: 1
£386.23 (inc. VAT)
Available to Order
Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes
Fitment Difficulty:![Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.]()
Fitting Time: 1hr![Fitting Time icon]()
Press Tool - Kit
PRESSKITSP
Follow installation instructions;Specification: 26 piece press kit
Quantity required: 1
£614.12 (inc. VAT)
In Stock
Related News
- Alex Bones wins Round 1 of the Time Attack series in his Evo 5 RS (Motorsport News)