Free UK delivery on orders over £50
×

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

Abarth[NEW RELEASES]
Alfa Romeo[NEW RELEASES]
Asia Motors
Aston Martin
Audi[NEW RELEASES]
Austin[NEW RELEASES]
Austin-Healey
Bentley[NEW RELEASES]
BMW[NEW RELEASES]
Chevrolet[NEW RELEASES]
Chrysler[NEW RELEASES]
Citroen[NEW RELEASES]
Daewoo[NEW RELEASES]
Daihatsu[NEW RELEASES]
Daimler[NEW RELEASES]
DMC
Dodge[NEW RELEASES]
Ferrari[NEW RELEASES]
Fiat[NEW RELEASES]
Ford[NEW RELEASES]
Ginetta[NEW RELEASES]
Hillman[NEW RELEASES]
Holden
Honda[NEW RELEASES]
Hummer
Hyundai[NEW RELEASES]
Indigo
Infiniti[NEW RELEASES]
Isuzu[NEW RELEASES]
Jaguar[NEW RELEASES]
Jeep[NEW RELEASES]
Jensen
Kia[NEW RELEASES]
Lancia[NEW RELEASES]
Land Rover[NEW RELEASES]
LDV
Lexus[NEW RELEASES]
Lotus[NEW RELEASES]
Mahindra
Maserati[NEW RELEASES]
Mazda[NEW RELEASES]
Mercedes-Benz[NEW RELEASES]
MG[NEW RELEASES]
Mini
Mitsubishi[NEW RELEASES]
Morris[NEW RELEASES]
Nissan[NEW RELEASES]
Noble
Opel[NEW RELEASES]
Peugeot[NEW RELEASES]
Porsche[NEW RELEASES]
Proton[NEW RELEASES]
Reliant[NEW RELEASES]
Renault[NEW RELEASES]
Rootes Group
Rover[NEW RELEASES]
Saab[NEW RELEASES]
Seat[NEW RELEASES]
Singer
Skoda[NEW RELEASES]
Smart[NEW RELEASES]
Ssangyong[NEW RELEASES]
Subaru[NEW RELEASES]
Sunbeam[NEW RELEASES]
Suzuki[NEW RELEASES]
Talbot
Tata[NEW RELEASES]
Tesla[NEW RELEASES]
Toyota[NEW RELEASES]
Triumph[NEW RELEASES]
TVR[NEW RELEASES]
Vauxhall[NEW RELEASES]
Volkswagen[NEW RELEASES]
Volvo[NEW RELEASES]

Reduce Tyre Wear

Toyota Corolla E120, E130 1.6 VVT-i Suspension Upgrades

2001 to 2004

Show

Front and Rear

1

Sway Bar Link - Assembly

TRCLNKSET4
TRCLNKSET4 Sway Bar Link - Assembly
Fitting Position: Front and Rear;Fitting Position: both sides;Fitting Difficulty: moderate;Fitting time [min]: 120

Quantity required: 1

£263.22 (inc. VAT)

Available to Order

Front

2

Bump Stop - Bushing Kit

SPF1833BK
SPF1833BK Bump Stop - Bushing Kit
Fitting Position: Front Axle;Fitting Difficulty: difficult;Fitting time [min]: 120

Quantity required: 1

£71.11 (inc. VAT)

In Stock

Kit Includes: 2 x Bump Stops, 2 x BSB

3

Control Arm Lower - Inner Rear Bushing Kit

SPF1900K
SPF1900K Control Arm Lower - Inner Rear Bushing Kit
Fitting Position: Front Axle;Fitting Difficulty: difficult;Fitting time [min]: 180;Axle alignment required after fitting

Quantity required: 1

£170.39 (inc. VAT)

In Stock

Kit Includes: 6 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves

4

Control Arm Lower - Inner Rear Bushing Kit

SPF1901K
SPF1901K Control Arm Lower - Inner Rear Bushing Kit
Fitting Position: Front Axle;Fitting Difficulty: difficult;Fitting time [min]: 180;Axle alignment required after fitting

Quantity required: 1

£151.27 (inc. VAT)

Available to Order

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 6 x Polyurethane Bushes

5

Control Arm Lower - Inner Rear Bushing Kit

SPF1902K
SPF1902K Control Arm Lower - Inner Rear Bushing Kit
Fitting Position: Front Axle;Fitting Difficulty: difficult;Fitting time [min]: 180;Axle alignment required after fitting

Quantity required: 1

£151.27 (inc. VAT)

Available to Order

Kit Includes: 6 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves

6

Sway Bar Mount - Bushing Kit

SPF3306-19.5K
SPF3306-19.5K Sway Bar Mount - Bushing Kit
Fitting Position: Front Axle;Fitting Difficulty: easy;Fitting time [min]: 60

Quantity required: 1

£37.12 (inc. VAT)

Available to Order

Kit Includes: 2 x Polyurethane Bushes

7

Sway Bar Mount - Bushing Kit

SPF3306-20K
SPF3306-20K Sway Bar Mount - Bushing Kit
Fitting Position: Front Axle;Fitting Difficulty: easy;Fitting time [min]: 60

Quantity required: 1

£37.12 (inc. VAT)

In Stock

Kit Includes: 2 x Polyurethane Bushes

8

Sway Bar Mount - Bushing Kit

SPF3306-25K
SPF3306-25K Sway Bar Mount - Bushing Kit
Fitting Position: Front Axle;Fitting Difficulty: easy;Fitting time [min]: 60

Quantity required: 1

£37.12 (inc. VAT)

In Stock

Kit Includes: 2 x Polyurethane Bushes

9

Sway Bar Mount - Bushing Kit

SPF3306-26K
SPF3306-26K Sway Bar Mount - Bushing Kit
Fitting Position: Front Axle;Fitting Difficulty: easy;Fitting time [min]: 60

Quantity required: 1

£37.12 (inc. VAT)

In Stock

Kit Includes: 2 x Polyurethane Bushes

10

Sway Bar Link - Assembly

TRC1025
TRC1025 Sway Bar Link - Assembly
Fitting Position: Front Axle;Fitting Difficulty: moderate;Fitting time [min]: 60

Quantity required: 1

£118.42 (inc. VAT)

Available to Order

Kit Includes: 2 x Links

11

Control Arm Lower Assembly Kit

TRC1072
TRC1072 Control Arm Lower Assembly Kit
Left and Right Arms for Standard Replacement and Repair Upgrade Our front lower control arm kit for the Toyota Celica and Corolla has been designed to be an easy repair solution. Offering both alignment and vehicle handling improvements. Designed not just as a repair solution but as an upgrade! Supplied as a complete kit and fully assembled with special uprated ball joints and proprietary SuperPro bushings. We have made TRC1072 by far the best repair choice on the market. These arms utilise the SuperPro bushings and are manufactured from a high strength material. By eliminating the O.E style rubber bushing, these arms have been optimised for longevity, durability and performance, without any unwanted NVH. SuperPro Control Arms are perfectly suited as a standard replacement and are an upgrade from the factory arms, eliminating the undesirable arm movement to maintain better steering geometry in all driving conditions. SuperPro Tip - SuperPro strongly advises that both arms should always be replaced at the same time to maintain the correct geometry and operation of the vehicle.

Quantity required: 1

£252.60 (inc. VAT)

In Stock

Fitment Difficulty:Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.
Fitting Time: 2hrsFitting Time icon
12

Camber Adjusting Bolt Kit

SPF4351-15K
SPF4351-15K Camber Adjusting Bolt Kit
Adds +/- 1.5 Degrees camberCamber Bolt Kit 15mm

Quantity required: 1

£52.28 (inc. VAT)

In Stock

Kit Includes: 2 x Bolts

13

Control Arm Lower-Inner Front Bush Kit

SPF0996K
SPF0996K Control Arm Lower-Inner Front Bush Kit

Quantity required: 1

£46.50 (inc. VAT)

In Stock

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

Fitment Difficulty:Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.
Fitting Time: 2hrs 30minsFitting Time icon
14

Control Arm Lower-Inner Rear Bush Kit

SPF3176K
SPF3176K Control Arm Lower-Inner Rear Bush Kit
Standard Replacement

Quantity required: 1

£158.88 (inc. VAT)

In Stock

Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes

Fitment Difficulty:Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.
Fitting Time: 4hrsFitting Time icon
15

Control Arm Lower-Inner Rear Bush Kit - Double Offset

SPF3178K
SPF3178K Control Arm Lower-Inner Rear Bush Kit - Double Offset
Alignment Correction
1 Degree Caster Adjustment available
A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Follow the installation instructions and enjoy the results!

Quantity required: 1

£166.42 (inc. VAT)

In Stock

Kit Includes: 2 x Steel Tubes, 2 x Sleeves, 6 x Polyurethane Bushes

Fitment Difficulty:Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.
Fitting Time: 4hrsFitting Time icon
16

Control Arm Lower-Inner Rear Bush Kit - Single Offset

SPF3177K
SPF3177K Control Arm Lower-Inner Rear Bush Kit - Single Offset
Alignment Correction
0.5 Degree Caster Adjustment available
Use this kit to rectify a steering pull after a vehicle has been aligned to the manufacturers specifications.

Supplied with an offset bush to be fitted to the passenger side and a standard bush for the drivers side, these kits stagger the caster or setback by repositioning the ball joint slightly forward in the chassis.

This is a non tyre wearing geometry change that has a substantial effect on a vehicles ability to track straight and other handling characteristics.

Follow the installation instructions and the problem is solved.

Quantity required: 1

£166.42 (inc. VAT)

Available to Order

Kit Includes: 6 x Polyurethane Bushes, 2 x Sleeves, 2 x Steel Tubes

Fitment Difficulty:Fitting Difficulty 3 out of 5. 1 being easiest, 5 being hardest.
Fitting Time: 4hrsFitting Time icon
17

Anti-Roll Bar Link

TRC4004
TRC4004 Anti-Roll Bar Link
Cut To Length Link10mm Ball Joint Link

Minimum Length 80mm - Maximum Length 320mm

Quantity required: 2

£37.79 (inc. VAT)

In Stock

Kit Includes: 1 x Link

Fitment Difficulty:Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.
Fitting Time: 30minsFitting Time icon
18

Anti-Roll Bar Link Kit - Heavy Duty Adjustable

TRC10200
TRC10200 Anti-Roll Bar Link Kit - Heavy Duty Adjustable
10mm Ball Joint suits vehicles manufactured in the UK10mm Ball Joint Adjustable Link

Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.

Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates Anti-Roll Bar link flex
  • Allows for neutral Anti-Roll Bar positioning
  • Maximises all positions on adjustable Anti-Roll Bars
  • Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1

£167.74 (inc. VAT)

In Stock

Kit Includes: 2 x Links

Fitment Difficulty:Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.
Fitting Time: 1hrFitting Time icon
19

Anti-Roll Bar Link Kit - Heavy Duty Adjustable

TRC12200
TRC12200 Anti-Roll Bar Link Kit - Heavy Duty Adjustable
12mm Ball Joint suits vehicles manufactured in Japan12mm Ball Joint Adjustable Link

Minimum Length 254 mm - Maximum Length 305 mm
Designed to maximise the benefit of Roll Control Adjustable Anti-Roll Bars and be used in place of that hard to find O.E link.

Features & Benefits
  • 6060-T5 Alloy Link
  • Ball for low friction and long life
  • Spanner provision for on-car adjustment
  • Eliminates Anti-Roll Bar link flex
  • Allows for neutral Anti-Roll Bar positioning
  • Maximises all positions on adjustable Anti-Roll Bars
  • Suits lowered or raised vehicles
SuperPro Tip - To get the best out of these adjustable link kits, please read the fitting instructions prior to installation.

Quantity required: 1

£167.74 (inc. VAT)

In Stock

Kit Includes: 2 x Links

Fitment Difficulty:Fitting Difficulty 2 out of 5. 1 being easiest, 5 being hardest.
Fitting Time: 1hrFitting Time icon
20

Anti-Roll Bar Mount Bush Kit

SPF3179-22K
SPF3179-22K Anti-Roll Bar Mount Bush Kit
standard sizeavailable Sizes 22 & 24mm

Quantity required: 1

£34.69 (inc. VAT)

In Stock

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:Fitting Difficulty 1 out of 5. 1 being easiest, 5 being hardest.
Fitting Time: 1hrFitting Time icon

Rear

21

Sway Bar Mount - Bushing Kit

SPF0613-16K
SPF0613-16K Sway Bar Mount - Bushing Kit
Fitting Position: Rear Axle;Fitting Difficulty: difficult;Fitting time [min]: 60;Axle alignment required after fitting

Quantity required: 1

£29.15 (inc. VAT)

Available to Order

Kit Includes: 2 x Polyurethane Bushes

22

Trailing Arm Lower - Bushing Kit

SPF0823K
SPF0823K Trailing Arm Lower - Bushing Kit
Fitting Position: Rear Axle;Fitting Difficulty: difficult;Fitting time [min]: 180;Axle alignment required after fitting

Quantity required: 1

£104.21 (inc. VAT)

In Stock

Kit Includes: 4 x Steel Tubes, 8 x Polyurethane Bushes

23

Control Arm Lower Rear - Bushing Kit

SPF1947K
SPF1947K Control Arm Lower Rear - Bushing Kit
Fitting Position: Rear Axle;Fitting Difficulty: difficult;Fitting time [min]: 240;Axle alignment required after fitting

Quantity required: 1

£154.74 (inc. VAT)

In Stock

Kit Includes: 8 x Steel Tubes, 8 x Polyurethane Bushes

24

Control Arm Lower Front - Bushing Kit

SPF2938K
SPF2938K Control Arm Lower Front - Bushing Kit
Fitting Position: Rear Axle;Fitting Difficulty: difficult;Fitting time [min]: 180;Axle alignment required after fitting

Quantity required: 1

£83.27 (inc. VAT)

In Stock

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

25

Camber Adjusting Bolt - Kit

SPF4351-12K
SPF4351-12K Camber Adjusting Bolt - Kit
Fitting Position: Rear Axle;Fitting Position: both sides;Follow installation instructions;Fitting Difficulty: difficult;Fitting time [min]: 60;Axle alignment required after fitting;Bolt diameter [mm]: 12;Camber correction [degree]: 1.5

Quantity required: 1

£39.96 (inc. VAT)

In Stock

Kit Includes: 2 x Bolts

26

Sway Bar Link - Assembly

TRC1045
TRC1045 Sway Bar Link - Assembly
Fitting Position: Rear Axle;Fitting Difficulty: moderate;Fitting time [min]: 60

Quantity required: 1

£148.00 (inc. VAT)

In Stock

Kit Includes: 2 x Links

Other

27

Press Tool - Kit

PRESSKITSP
PRESSKITSP Press Tool - Kit
Follow installation instructions;Specification: 26 piece press kit

Quantity required: 1

£614.12 (inc. VAT)

In Stock

Related News

Back to Top