Mazda 3 BK 2.3 MPS Suspension Upgrades

1

Engine Front Torque Arm

The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline's torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.

Quantity required: 1

£217.50 (inc. VAT)

In Stock

2

Essential Vehicle Kit

KIT169K

Fitting Position: Front and Rear;Fitting Difficulty: difficult;Fitting time [min]: 1020;Axle alignment required after fitting

Quantity required: 1

£877.38 (inc. VAT)

Available to Order

Kit Includes: 1 x

3

Essential Vehicle Kit

KIT170K

Fitting Position: Front and Rear;Fitting Difficulty: difficult;Fitting time [min]: 1020;Axle alignment required after fitting

Quantity required: 1

£803.34 (inc. VAT)

Available to Order

Kit Includes: 1 x

4

Front And Rear Suspension Bush Kit

A

Standard Alignment

KIT0169K

Kit Includes: 1X SPF3315K, 1XSPF3368K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2325K.

Quantity required: 1

£899.34 (inc. VAT)

In Stock

B

Caster & Camber Adjustable

KIT0170K

Kit Includes: 1X SPF3315K, 1XSPF3370K, 1 x SPF3466K, 1X SPF2323K, 1X SPF2324K, 2X SPF2326K.

Quantity required: 1

£926.92 (inc. VAT)

In Stock

5

Front and Rear Anti-Roll Bar Upgrade Kit

BMK001

Important Notes: Contains BMF57Z, BMR88Z, KLC151 and KLC185 - essential to 'Activate more grip'

Engineered to 'Activate More Grip', BMK001 is a packaged solution designed to improve performance and enhance the driving experience of your vehicle. Boasting a 27mm 2 point adjustable front Anti-Roll bar and 27mm 2 point adjustable rear Anti-Roll bar, the kit is completed with high quality Anti-Roll bar links and mounting accessories that ensure optimum performance and ease of installation. Achieve perfect balance and precise tuning with this Whiteline Anti-Roll Bar Kit.

Quantity required: 1

£727.15 (inc. VAT)

In Stock

6

Control Arm Lower - Bushing Kit

KIT171K

Fitting Position: Front Axle;Fitting Position: Lower;Fitting Position: Upper;Fitting Position: both sides;Fitting Difficulty: difficult;Fitting time [min]: 360;Axle alignment required after fitting

Quantity required: 1

£260.06 (inc. VAT)

Available to Order

Kit Includes: 1 x

7

Sway Bar Mount - Bushing Kit

SPF3902-28K

Fitting Position: Front Axle;Fitting Difficulty: difficult;Fitting time [min]: 120;Axle alignment required after fitting

Quantity required: 1

£34.66 (inc. VAT)

In Stock

Kit Includes: 2 x Polyurethane Bushes

8

Complete Control Arm Assembly Kit

TRC1050

Kit includes both arms, standard alignment front bushes and, standard alignment rear bushes, brackets and bolts.

Quantity required: 1

£325.61 (inc. VAT)

In Stock

Kit Includes: 2 x Arms, 2 x BRACKETS

Fitment Difficulty:

Fitting Time: 1hr

9

Anti-Lift Kit - Front Wishbone Control arm lower inner rear bushing - Ford/Mazda/Volvo

KCA428

Important Notes: Adds +0.5deg caster + Anti-Lift.

Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. By increasing static caster and improving front-end geometry, the new alloy mounts coupled with low-compliance synthetic elastomer bushings dramatically sharpen initial turn-in response and reduce understeer.

Quantity required: 1

£281.86 (inc. VAT)

In Stock

10

Control Arm Bush Kit

A

Standard Alignment Kit

KIT0171K

Kit Includes: 1xSPF3368K, 1xSPF3115K

Quantity required: 1

£268.12 (inc. VAT)

In Stock

B

Performance Alignment Kit

KIT0171CADJK

Kit Includes: 1xSPF3370K, 1xSPF3115K

Quantity required: 1

£232.37 (inc. VAT)

In Stock

11

Control Arm Lower-Inner Front Bush Kit

A

12mm Bolt

SPF2137K

12mm Bolt

Quantity required: 1

£69.71 (inc. VAT)

In Stock

Kit Includes: 4 x Polyurethane Bushes, 2 x Steel Tubes

B

14mm Bolt

SPF3115K

14mm Bolt

Quantity required: 1

£72.66 (inc. VAT)

In Stock

Kit Includes: 2 x Steel Tubes, 4 x Polyurethane Bushes

12

Control Arm Lower-Inner Rear Bush

A

Standard Alignment Settings

SPF3368K

Standard replacement - fits OEM bracket. If the original bracket is in poor condition or shows any evidence of stretching SPF4653K which includes a replacement bracket should be used.

Quantity required: 1

£173.23 (inc. VAT)

In Stock

Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

B

Standard Alignment Settings with Bracket and Bolts

SPF4653K

Standard replacement. Offers quicker and easier fitment and is a solution when OEM brackets are stretched or in poor condition.

Quantity required: 1

£287.33 (inc. VAT)

In Stock

Kit Includes: 2 x Brackets

C

Steering-Pull Correction Kit

SPF3369K

1 x Offset 1 x Standard Bushings; Approx 0.5 Degree Caster change

Quantity required: 1

£173.23 (inc. VAT)

Available to Order

Kit Includes: 2 x Polyurethane Bushes, 2 x Sleeves, 2 x Washer(s) - used for Steel and / or Polyurethane, 1 x Instruction Sheet, 2 x Steel Tubes

D

Performance Alignment Correction Kit

SPF3370K

2 x Offset Bushings; Approx 0.5 Degree Caster change per bush

Quantity required: 1

£173.23 (inc. VAT)

In Stock

Kit Includes: 2 x Steel Tubes, 1 x Instruction Sheet, 2 x Washer(s) - used for Steel and / or Polyurethane, 2 x Sleeves, 2 x Polyurethane Bushes

13

27mm Extra-Heavy-Duty Front Anti-Roll Bar Upgrade

BMF57Z

Important Notes: 27mm - 2-Position Adjustable.

Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres, increasing cornering grip and improving outright performance. This Whiteline 27mm - 2-Position Adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.

Quantity required: 1

£256.12 (inc. VAT)

In Stock

14

Adjustable Front Anti-Roll Bar Links

KLC151

Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but, most importantly, ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.

Quantity required: 1

£160.90 (inc. VAT)

In Stock

15

Anti-Roll Bar Mount To Chassis Bush

A

To Fit 23mm Bar on Diesel Vehicles

SPF2620-23K

This suits standard bar size of 23mm on diesel vehicles but please measure bar diameter 20, 22, 24mm available

Quantity required: 1

£33.60 (inc. VAT)

Available to Order

Kit Includes: 2 x Polyurethane Bushes

Fitment Difficulty:

Fitting Time: 1hr

B

To Fit OE 20mm Bar

SPF3114-20K

OE bar with flats at bush mounting point

Quantity required: 1

Please ask for pricing

Available to Order

C

To Fit Aftermarket Round Bars

SPF2141-21K

Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm options are also available (SPF2141-20K or SPF2141-22K)

Quantity required: 1

£41.16 (inc. VAT)

In Stock

Kit Includes: 2 x Polyurethane Bushes

16

Anti-Roll Bar Link Kit

A

Cut-To-Length Link

TRC4004

10mm Ball Joint. Minimum length 80mm - maximum length 320mm

Quantity required: 2

£37.79 (inc. VAT)

In Stock

Kit Includes: 1 x Link

Fitment Difficulty:

Fitting Time: 30mins

B

Sway Bar Link

TRC4025

Standard Replacement10mm Ball Joint Link 180 Degree opposed Length 300 mm center to center

Quantity required: 2

£49.52 (inc. VAT)

In Stock

Kit Includes: 1 x Link

Fitment Difficulty:

Fitting Time: 30mins

C

Heavy-Duty Adjustable

TRC10200

10mm Ball Joint Adjustable Link. Minimum Length 245mm. Maximum Length 305mm. OE length 270mm

Quantity required: 1

£167.74 (inc. VAT)

In Stock

Kit Includes: 2 x Links

Fitment Difficulty:

Fitting Time: 1hr

17

Essential Vehicle Kit

KIT172K

Fitting Position: Rear Axle;Fitting Difficulty: difficult;Fitting time [min]: 720;Axle alignment required after fitting

Quantity required: 1

£616.70 (inc. VAT)

Available to Order

Kit Includes: 1 x

18

Sway Bar - Assembly

RC0036RZ-27

Fitting Position: Rear Axle;Fitting Difficulty: difficult;Fitting time [min]: 120;Axle alignment required after fitting

Quantity required: 1

£276.29 (inc. VAT)

Available to Order

Kit Includes: 1 x Anti-Roll Bar, 2 x Polyurethane Bushes

19

Sway Bar Mount - Bushing Kit

SPF3902-23K

Fitting Position: Rear Axle;Fitting Difficulty: difficult;Fitting time [min]: 120;Axle alignment required after fitting

Quantity required: 1

£34.66 (inc. VAT)

In Stock

Kit Includes: 2 x Polyurethane Bushes

20

Control Arm Lower Front - Arm Assembly

TRC1148

Fitting Position: Rear Axle;Fitting Position: Lower;Fitting Position: Front;Fitting Position: both sides;Fitting Difficulty: difficult;Fitting time [min]: 90;Axle alignment required after fitting

Quantity required: 1

£95.52 (inc. VAT)

In Stock

21

Control Arm Upper - Arm Assembly

TRC1149

Fitting Position: Rear Axle;Fitting Position: Upper;Fitting Position: both sides;Fitting Difficulty: difficult;Fitting time [min]: 90;Axle alignment required after fitting

Quantity required: 1

£114.68 (inc. VAT)

In Stock

22

27mm Heavy-Duty Blade Adjustable Rear Anti-Roll Bar

BMR88Z

Important Notes: 27mm - 2 point adjustable - TUV certified

Engineered to 'Activate More Grip', Anti-Roll bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tires, increasing cornering grip and improving outright performance. This Whiteline 27mm 2-point adjustable Anti-Roll bar = more grip = better handling = outright performance - it's the best dollar-for-dollar handling improvement you can make to your vehicle. In fact, benefits extend to handling, safety and tyre wear improvements without affecting ride quality or comfort.

Quantity required: 1

£256.12 (inc. VAT)

Available to Order

23

Rear Anti-Roll Bar Link Kit

KLC185

Not many enthusiasts are aware that OE and, more importantly, aftermarket Anti-Roll bar effectiveness can be hindered by worn or inadequate mounts, drop links and lateral stoppers. Whiteline adjustable Anti-Roll bar links are engineered to be up to the task with top spec, lightweight componentry combined with a window of adjustability, eliminating Anti-Roll bar preload on installation but most importantly ensuring the maximum output of the Anti-Roll bar for improved grip and better handling.

Quantity required: 1

£160.90 (inc. VAT)

In Stock

24

Rear - Lower Front Control Arms

KTA137

Heavy-duty adjustable alloy rear lower front control arms are designed to allow for increased range with easy on-car toe adjustment. Low-compliance bushings are used to minimise NVH and maximise longevity.

Quantity required: 1

£333.32 (inc. VAT)

In Stock

25

Adjustable Control Arm Upper Rear

KTA138A

Heavy-duty control arms provide on-car adjustability of camber alignment. This results in improved traction, increased cornering grip and better tyre life - ultimately improving overall performance.

Quantity required: 1

£320.68 (inc. VAT)

In Stock

26

Rear Control arms - Lower Front Arms

WA401

Important Notes: Supplied as a single arm so you will need to order two. Complete arm fitted with bushings.

Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two of the problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market leading Whiteline synthetic elastomer bushings.

Quantity required: 2

£55.99 (inc. VAT)

In Stock

27

Rear Control Arms - Upper Arms

WA402

Most would agree that the time and stress to remove and replace bushings and ball joints to suspension arms can be hard to justify. Making up press tools and damaging arms are just two problems one can endure. Why put yourself through it when you can purchase complete arms, fitted with market-leading Whiteline synthetic elastomer bushings.

Quantity required: 2

£80.71 (inc. VAT)

In Stock

28

Blade Trailing Arm Front Bush

SPF3466K

Do not remove original shell 09/2002-05/2005

Quantity required: 1

£157.87 (inc. VAT)

In Stock

Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes

Fitment Difficulty:

Fitting Time: 4hrs

Wheel-alignment required after fitment

29

Blade Trailing Arm Front Bush

SPF3466K

Do not remove original shell

Quantity required: 1

£157.87 (inc. VAT)

In Stock

Kit Includes: 2 x Polyurethane Bushes, 1 x Instruction Sheet, 2 x Steel Tubes

30

Toe Control Arm Lower-Inner & Outer Bush Kit

SPF2323K

Front Arm Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations. Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life. SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

£135.79 (inc. VAT)

In Stock

Kit Includes: 4 x Polyurethane Bushes, 4 x Steel Tubes

31

Control Arm Lower Inner and Outer Bush

SPF2324K

Rear Arm. Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

£164.60 (inc. VAT)

In Stock

Kit Includes: 4 x Sleeves, 4 x Steel Tubes, 4 x Polyurethane Bushes

32

Control Arm Upper-Inner Bush Kit

A

Standard Alignment Kit

SPF2325K

Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

£87.98 (inc. VAT)

In Stock

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves

B

Performance Alignment Kit

SPF2326K

1 Degree of camber adjustment. To be used in this position when SPF2326K is already used in the outer position and 2 Degrees Camber adjustment in total required

Quantity required: 1

£106.16 (inc. VAT)

In Stock

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes

33

Control Arm Upper-Outer Bush Kit

A

Standard Alignment Kit

SPF2325K

Control arm bushes stabilise the movement of the arms to ensure the correct geometry is maintained in all situations.
Worn or rubber bushes in these locations lead to dynamic changes in wheel alignment that effect the handling of a vehicle as well as the tyre life.
SuperPro Bushings solve this issue and are the perfect repair or repair upgrade solution.

Quantity required: 1

£87.98 (inc. VAT)

In Stock

Kit Includes: 2 x Polyurethane Bushes, 2 x Steel Tubes, 2 x Sleeves

B

Performance Alignment Kit

SPF2326K

Prefered Position to gain 1 Degree Camber change. A Double Offset kit is used for enhanced handling performance and will deliver positive caster to both sides of the vehicle.
The vehicle will have improved directional stability, crisper, more responsive steering and improved 'return to centre' feel.
This is a non tyre wearing geometry change that has a substantial effect on a vehicles handling characteristics.

Quantity required: 1

£106.16 (inc. VAT)

In Stock

Kit Includes: 2 x Sleeves, 2 x Steel Tubes, 2 x Polyurethane Bushes

34

Anti-Roll Bar Mount To Chassis Bush

A

To Fit OE Bar

SPF2578K

OE bar with flats at bush mounting point

Quantity required: 1

£55.97 (inc. VAT)

In Stock

Kit Includes: 4 x Polyurethane Bushes

B

To Fit Aftermarket Round Bars

SPF2141-21K

Suits 21mm aftermarket round bar. Measure bar diameter. 20 and 22mm available (SPF2141-20K or SPF2141-22K)

Quantity required: 1

£41.16 (inc. VAT)

In Stock

Kit Includes: 2 x Polyurethane Bushes

35

Anti-Roll Bar Link Kit

TRC4002

Standard Replacement. 10mm Horizontal Ball Joint Link with 10mm Vertical Ball Joint. Length 76-86mm center to center

Quantity required: 2

Please ask for pricing

In Stock

Kit Includes: 1 x Link

Fitment Difficulty:

Fitting Time: 30mins

36

Press Tool - Kit

PRESSKITSP

Follow installation instructions;Specification: 26 piece press kit

Quantity required: 1

£614.12 (inc. VAT)

In Stock

PRODUCT RANGES:

SELECT YOUR VEHICLE:

OR, SELECT VEHICLE MANUFACTURER:

You are Viewing

Mazda 3 BK 2.3 MPS

2006 to 2009 | Hatchback | Petrol | 260HP | Front Wheel Drive

Reduce Wear on Suspension Components

Mazda 3 BK 2.3 MPS Suspension Upgrades

Engine Bay

Engine Front Torque Arm

£217.50 (inc. VAT)

Front and Rear

Essential Vehicle Kit

£877.38 (inc. VAT)

Essential Vehicle Kit

£803.34 (inc. VAT)

Front And Rear Suspension Bush Kit

Standard Alignment

£899.34 (inc. VAT)

Caster & Camber Adjustable

£926.92 (inc. VAT)

Front and Rear Anti-Roll Bar Upgrade Kit

£727.15 (inc. VAT)

Front

Control Arm Lower - Bushing Kit

£260.06 (inc. VAT)

Sway Bar Mount - Bushing Kit

£34.66 (inc. VAT)

Complete Control Arm Assembly Kit

£325.61 (inc. VAT)

Anti-Lift Kit - Front Wishbone Control arm lower inner rear bushing - Ford/Mazda/Volvo

£281.86 (inc. VAT)

Control Arm Bush Kit

Standard Alignment Kit

£268.12 (inc. VAT)

Performance Alignment Kit

£232.37 (inc. VAT)

Control Arm Lower-Inner Front Bush Kit

12mm Bolt

£69.71 (inc. VAT)

14mm Bolt

£72.66 (inc. VAT)

Control Arm Lower-Inner Rear Bush

Standard Alignment Settings

£173.23 (inc. VAT)

Standard Alignment Settings with Bracket and Bolts

£287.33 (inc. VAT)

Steering-Pull Correction Kit

£173.23 (inc. VAT)

Performance Alignment Correction Kit

£173.23 (inc. VAT)

27mm Extra-Heavy-Duty Front Anti-Roll Bar Upgrade

£256.12 (inc. VAT)

Adjustable Front Anti-Roll Bar Links

£160.90 (inc. VAT)

Anti-Roll Bar Mount To Chassis Bush

To Fit 23mm Bar on Diesel Vehicles

£33.60 (inc. VAT)

To Fit OE 20mm Bar

Please ask for pricing

To Fit Aftermarket Round Bars

£41.16 (inc. VAT)

Anti-Roll Bar Link Kit

Cut-To-Length Link

£37.79 (inc. VAT)

Sway Bar Link

£49.52 (inc. VAT)

Heavy-Duty Adjustable

£167.74 (inc. VAT)

Rear

Essential Vehicle Kit

£616.70 (inc. VAT)

Sway Bar - Assembly

£276.29 (inc. VAT)

Sway Bar Mount - Bushing Kit

£34.66 (inc. VAT)

Control Arm Lower Front - Arm Assembly

£95.52 (inc. VAT)

Control Arm Upper - Arm Assembly

£114.68 (inc. VAT)

2006 to 2009
|
Hatchback
|
Petrol
|
260HP
|
Front Wheel Drive